4 x 8 ft air pillow for above-ground pool – Winterizing

The 4 x 8 ft air pillow for above-ground pools is a practical accessory to help winterize your pool. Installed in the center of the pool, beneath the winter cover, it creates a slight slope that helps direct rainwater and melting snow toward the edges rather than allowing it to accumulate in the center.

This setup helps reduce water pockets and the load placed on the winter cover. The pillow also helps reduce the pressure caused by freezing on the cover and pool walls.

Compatible with round or oval above-ground pools, it installs quickly and can be reused from one season to the next.

Key Features

• Dimensions: 4 x 8 ft (approximately 1.22 x 2.44 m)
• Designed for above-ground pools
• Compatible with round and oval pools
• Helps reduce the accumulation of water and snow in the center of the cover
• Helps reduce the load placed on the winter cover
• Helps manage pressure caused by freezing
• Promotes water flow toward the edges
• Simple and quick installation
• Reusable
• Several sizes available

Installation

1. Inflate the pillow to approximately 60 to 70% so that it remains sufficiently compressible.
2. Position it in the center of the pool and secure it in place as needed.
3. Install and secure the winter cover over it.
4. Periodically check its position and air level during the winter.

Usage Tips

Avoid overinflating the pillow. It should retain some flexibility so it can better respond to pressure variations during the winter.

To further facilitate the removal of water accumulated on the cover, a cover pump or siphon can also be used.

For larger pools, it may be preferable to use several pillows or choose a size suited to the pool’s dimensions.