Elastic pool closing system

Keep your winter cover securely in place with this premium elastic cord system for pool closing, designed to simplify installation in the fall and make opening easier in spring.

Made in Quebec, this system uses durable elastic cords attached to a UV-treated rope to provide constant tension throughout the winter. It is suitable for several round, oval, and inground pool sizes.

When the water level rises in spring, the elastic tension helps the cover return to its position, promoting water drainage, cover drying, and removal.

Better cover stability during the winter

The elastic cord system helps keep the cover evenly distributed around the pool, even when the water level is lowered for closing.

It helps:

• Maintain even tension across the cover
• Reduce movement caused by wind
• Limit the accumulation of leaves and debris
• Support the cover as the water level changes
• Make it easier to open the pool in spring
• Avoid using an air pillow in many installations

Results may vary depending on the pool type, cover used, installation method, and winter conditions.

Spring lift function

As the snow melts and the pool water level rises, the system’s tension helps the cover gradually lift.

This action can help:

• Reduce stagnant water pockets
• Facilitate the natural drainage of water
• Speed up cover drying
• Simplify removal and storage
• Reduce the time needed to open the pool

However, the cover must be inspected and cleared of large debris before removal.

Made in Quebec

This system is made in Quebec with materials selected to withstand winter conditions.

Main benefits

• Made in Quebec
• Heavy-duty elastic cords
• UV-resistant rope
• Cold-weather design
• Reusable installation
• Several sizes available
• Compatible with different pool shapes

Simple and practical installation

The system is designed to be installed around the pool and connected to the fastening points of the compatible winter cover.

Proper installation helps maintain evenly distributed tension without adding heavy or bulky accessories.

General recommendations

1. Complete the pool closing process.
2. Lower the water level according to the applicable recommendations.
3. Install and center the winter cover.
4. Position the bungee cord system around the pool.
5. Attach the hooks to the designated points on the cover.
6. Distribute the tension evenly.
7. Check the installation regularly during the winter.

Avoid applying excessive tension to any specific section of the cover.

Sizes for round pools

SR0812

Compatible with round pools measuring:

• 8 ft
• 10 ft
• 12 ft

SR1518

Compatible with round pools measuring:

• 15 ft
• 18 ft

SR2124

Compatible with round pools measuring:

• 21 ft
• 24 ft

SR2730

Compatible with round pools measuring:

• 27 ft
• 30 ft

Sizes for oval pools

SRO1224

Compatible with the following oval pools:

• 12 ft × 18 ft
• 12 ft × 24 ft
• 14 ft × 28 ft
• 16 ft × 25 ft

SRO1630

Compatible with the following oval pools:

• 16 ft × 30 ft
• 16 ft × 32 ft
• 16 ft × 34 ft

SRO1833

Compatible with oval pools measuring:

• 18 ft × 33 ft

Sizes for inground pools

SRC1224

Compatible with the following inground pools:

• 12 ft × 24 ft
• 14 ft × 28 ft

SRC1630

Compatible with the following inground pools:

• 16 ft × 30 ft
• 16 ft × 32 ft
• 16 ft × 36 ft

SRC1836

Compatible with the following inground pools:

• 18 ft × 34 ft
• 18 ft × 36 ft
• 18 ft × 40 ft
• 20 ft × 40 ft

SRC2444

Compatible with inground pools measuring:

• 24 ft × 44 ft

SRC2550

Compatible with inground pools measuring:

• 25 ft × 50 ft

Recommended checks before purchase

Before choosing your bungee cord system, check:

• The shape of the pool
• The exact diameter of a round pool
• The length and width of an oval or inground pool
• The dimensions of the winter cover
• The position of the hooks or eyelets
• The condition of the existing rope and bungee cords
• The fastening method used

The system must be selected according to the actual dimensions of the pool and cover.

System maintenance

To extend the life of the bungee cords:

• Inspect the hooks before each installation
• Check the condition of the rope
• Replace stretched or damaged sections
• Clean the components after removal
• Allow to dry completely before storage
• Store in a dry place protected from sunlight
• Avoid all contact with sharp objects

Replacement hooks and bungee cords can be purchased separately as needed.

Main benefits

• Bungee cord system for winter covers
• Suitable for round, oval, and inground pools
• Several sizes available
• Maintains constant tension
• Helps stabilize the cover during winter
• Helps the cover rise in spring
• Reduces water and debris accumulation
• Can replace the use of an air pillow
• Simple, reusable installation
• Made in Quebec
• Designed for winter conditions

Important

This system is designed to hold a compatible winter cover or leaf net in place.

This is not a safety cover. The cover and bungee cord system must never be used to support the weight of a person, child, or animal.

Technical specifications

Product
Bungee cord system for pool covers

Use
Winter closing and protection

Manufacturing
Quebec

Main materials
UV-resistant cord, bungee cords, and attachment hooks

Compatible pools
Round, oval, and inground pools, depending on the selected size

Reusable installation
Yes

Safety cover
No

Package contents

• 1 bungee cord system for pool covers
• Size corresponding to the selected dimensions
• Attachment hooks installed according to the model configuration

The winter cover and other closing accessories are sold separately, unless otherwise indicated.

Simplify closing and opening your pool

This premium bungee cord system offers a practical solution for keeping your winter pool cover in place throughout the cold season.

Thanks to its Quebec-made construction, flexible tension, and wide range of available sizes, it helps protect the pool during winter and makes it easier to remove the cover in spring.

Available from Piscine Hippocampe in several sizes.