Moov Reversible MR750 Pool Heat Pump – 75,000 BTU

Extend your swimming season with the Moov Reversible MR750 75,000 BTU pool heat pump. Designed to provide reliable, quiet, and durable heating, it is an excellent solution to keep water comfortable in spring, throughout summer, and into the late season.

With its reverse cycle defrost, spiral titanium heat exchanger, dual rotary compressor, and built-in Wi-Fi module, the MR750 combines performance, ease of use, and excellent value.

75,000 BTU heating power

The Moov Reversible MR750 delivers a heating capacity of up to 75,000 BTU under the nominal conditions set by the manufacturer.

Advertised performance

• Nominal heating capacity: 75,000 BTU
• Capacity in cool weather: approximately 47,000 BTU
• Indicative maximum volume: 17,000 US gallons
• Indicative maximum volume: approximately 63,000 liters
• Outdoor operating range: -5 to 43 °C

Actual capacity varies depending on outside temperature, water temperature, humidity, wind exposure, pool volume, and use of a solar cover.

Reversible defrost to extend the season

The reversible defrost technology allows the heat pump to temporarily reverse its cycle when frost buildup is detected on the evaporator.

This method speeds up defrosting so the unit can resume heating more quickly.

Main advantages

• Faster defrosting
• Operation adapted to cooler temperatures
• Reduced interruptions caused by frost
• More stable heating in spring and autumn
• Extended swimming season
• Operating range can go down to -5 °C

Heating capacity gradually decreases as the outside temperature drops, as with any pool heat pump.

Spiral titanium heat exchanger

The MR750 is equipped with a titanium heat exchanger housed in a PVC casing.

According to Moov, its spiral design provides a heating surface up to 30% larger, promoting better heat transfer to the pool water.

Advantages

• Efficient heat transfer
• Fast water heating
• Excellent corrosion resistance
• Compatible with chlorine pools
• Suitable for pools equipped with a salt system
• Durable construction

Properly balanced water remains essential to protect the heat exchanger and all pool equipment.

Dual rotary compressor

The Moov MR750 uses a traditional fixed-speed compressor with a dual rotary mechanism.

The two rotors work together to better balance vibrations produced during heating.

Benefits

• More stable operation
• Vibration reduction
• Good energy efficiency
• Better controlled noise level
• Consistent performance
• Proven mechanical design

The MR750 is a fixed-speed heat pump. It should not be confused with a variable-speed Full-Inverter heat pump.

Soundproof mechanical chamber

The mechanical chamber is surrounded by noise-reducing walls and reinforced with absorbing cushions that limit vibration transmission.

The technical manual indicates an acoustic pressure of approximately 58 dB(A) at 1 meter for the MR750. The perceived level may vary depending on the installation surface, clearances, and immediate environment.

For quieter installation

• Install the device on a solid, level base
• Respect recommended clearances
• Avoid enclosed spaces that amplify noise
• Use appropriate anti-vibration mounts
• Keep the heat pump away from windows when possible

Built-in Wi-Fi module

The Moov Reversible MR750 heat pump includes a Wi-Fi module allowing remote control via the Moov app.

Convenient features

• Set the water temperature
• Turn the device on or off
• Check its operating status
• Adjust compatible settings
• Control the heat pump remotely

Availability of certain features may vary depending on the app version and device configuration.

Dimensions and connections

The MR750 features a horizontal air discharge design.

Main dimensions

• Width: 45.3 in
• Depth: 17.9 in
• Height: 30 in
• Net weight: approximately 165 lb
• Water connections: 1 1/2 inch
• Nominal water flow rate: approximately 31.5 GPM

Adequate free space must be maintained around the unit to allow effective air circulation and convenient access for maintenance.

Electrical requirements

The heat pump must be connected to a dedicated electrical circuit complying with the manufacturer's requirements and applicable electrical standards.

Electrical characteristics

• Power supply: 208 to 230 V
• Frequency: 60 Hz
• Phase: single-phase
• Maximum operating current: 26.5 A
• Maximum breaker: 40 A
• Grounding mandatory

Electrical connection must be performed by a qualified electrician.

For which pool to choose the MR750?

Moov indicates an approximate maximum volume of 17,000 US gallons or 63,000 liters. This value remains indicative and must be adapted to the actual installation conditions.

Sizing must notably take into account:

• The size and volume of the pool
• The type of pool, above ground or inground
• The desired water temperature
• The desired season length
• Exposure to sun and wind
• The installation region
• The use of a solar cover
• The number of daily filtration hours

Choosing a sufficiently powerful heat pump generally allows reaching the desired temperature faster and better maintaining heat in cool weather.

The importance of a solar cover

Using a solar cover is highly recommended with a heat pump.

It notably allows to:

• Reduce heat loss during the night
• Limit evaporation
• Maintain a more stable temperature
• Shorten operating time
• Reduce energy consumption
• Extend the swimming season further

Main features

• Residential pool heat pump
• Moov Brand
• Reversible Series
• Model MR750
• Rated capacity of 75,000 BTU
• Capacity of about 47,000 BTU in cool weather
• Reverse cycle defrost
• Operating range from -5 to 43 °C
• Titanium spiral exchanger
• PVC exchanger housing
• Fixed-speed dual rotary compressor
• Soundproof mechanical chamber
• Built-in Wi-Fi module
• Horizontal air exhaust
• 1 1/2 inch water fittings
• Power supply from 208 to 230 V
• Maximum breaker of 40 A
• Indicative maximum volume of 63,000 liters

Technical specifications

Product
Pool heat pump

Brand
Moov

Series
Reversible

Model
MR750

Nominal capacity
75,000 BTU

Capacity in cool weather
Approximately 47,000 BTU

Maximum indicative volume
17,000 US gallons or 63,000 liters

Outdoor temperature range
-5 to 43 °C

Power supply
208 to 230 V, 60 Hz, single-phase

Maximum current
26.5 A

Maximum breaker
40 A

Heat exchanger
Titanium in a PVC casing

Compressor
Fixed-speed dual rotary

Refrigerant
R410A

Nominal water flow
Approximately 31.5 GPM

Water connections
1 1/2 in

Sound pressure
Approximately 58 dB(A) at 1 meter

Dimensions
45.3 x 17.9 x 30 in

Net weight
Approximately 165 lb

Air exhaust
Horizontal

Control
Thermostat with built-in Wi-Fi module

Manufacturer’s warranties

Coverage offered by Moov includes:

• 3-year warranty on parts
• 3-year warranty on labor
• 5-year warranty on the titanium heat exchanger

Manufacturer’s installation terms, exclusions, and requirements apply.

Professional installation recommended

The heat pump must be installed according to the manufacturer’s manual.

Installation must include

• A solid and perfectly level base
• Sufficient clearance for air circulation
• Plumbing providing adequate flow
• Accessible fittings for maintenance
• Dedicated electrical circuit
• Compliant grounding
• Proper condensation drainage
• A complete check at startup

The manufacturer recommends professional installation and connection by a certified electrician.

Why choose the Moov Reversible MR750?

• 75,000 BTU heating power
• Reversible defrost
• Operation suited to Quebec’s climate
• Titanium heat exchanger
• Compatible with saltwater pools
• Built-in Wi-Fi module
• Robust construction
• Stable operation
• Advantageous warranties
• Excellent value for money
• Easy maintenance
• Compact design

Enjoy your pool longer

The Moov Reversible MR750 75,000 BTU heat pump is an efficient solution for heating a residential pool and extending the swimming season. Its reversible defrost, titanium spiral heat exchanger, dual rotary compressor, and Wi-Fi control offer an appealing combination of power, simplicity, and durability.

Available now at Piscine Hippocampe.